Whether you need a spray solution for turf lawns, slopes, medians, high traffic, or high wind locations, Toro® spray bodies provide the options you are looking for. Traditional MPR to high efficiency water management solutions, Toro nozzles provide reliable easy-to-use products with the latest in water saving technology.
C570Z PRX This model comes complete with both the patented X-Flow and pressure regulation-perfect for high or varying pressure, including long lines and slopes.
Patented X-flow® Water Shut-off Device
Built into the riser and restricts water loss by 99% if the nozzle is removed or damaged, eliminating potential erosion or safety concerns. Allows for “dry” nozzle and filter-replacement or maintenance, while the system is running.
Patented In-riser Pressure Regulator
Maintains constant 30 psi (2,1 Bar) psi outlet pressure, which minimizes misting and fogging caused by pressures above 30 psi (2,1 Bar).
Zero Flush Wiper Seal
Prevents flushing on pop-up, allowing more sprinklers on the same line.
Enhanced Retraction Spring and Wiper Seal
Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.
Small 2” (50mm) Diameter Cap
Less visible, reducing damage from exposure or vandals.
Radius
2'-26' (0.6 - 7.9 m)
Flow
0.05-4.5 GPM
Recommended Operating Pressure
30 PSI (2.1 BAR)
Maximum Operating Pressure
75 PSI (5.1 BAR)
Minimum Operating Pressure
20 PSI (1.3 BAR)
Inlet
1/2" (13 mm) female threaded
Pop-Up Height
2", 3", 4", 6", 12" (50, 76, 100, 150, 300 mm)
Body Diameter
1 3/8" (35 mm) except 12P - 1 5/8" (41 mm) & 12P SI - 1 3/4" (45 mm)
Cap Diameter
2" (50 mm)
Operating Pressure
20-75 PSI
Body Style
Side inlet option
The 570Z is ideal for small to medium size landscape areas and intricate designs. The PR and PRX models are ideal for applications with high or varying operating pressure, including long lines and slopes. The X-Flow feature restricts water loss by 99% if damaged.
Zero Flush Wiper Seal
Prevents flushing on pop-up, allowing more sprinklers on the same line.
One-Piece Check Valve
Easily installed at the factory or in the field. Maintains up to 10’ (3m) elevation change.
Small 2” (50mm) Diameter Cap
Less visible, reducing damage from exposure or vandals.
Radius
2'-26' (.6 - 7.9 m)
Flow
0.05-4.5 GPM (.2 - 17 LPM)
Recommended Operating Pressure
20-50 PSI (1.4 - 3.5 Bar)
Inlet
1/2" (1.3 cm) female threaded
Pop-Up Height
2", 3", 4", 6", 12" (50 mm, 75 mm, 100 mm, 150 mm, 300 mm)
Body Diameter
1 3/8" (35 mm) except 12P - 1 5/8" (41 mm) & 12P SI - 1 3/4" (45 mm)
Cap Diameter
2" (50 mm)
Body Style
Side inlet option
This pressure regulating model is ideal for applications with high wind or varying operating pressures.
Patented In-riser Pressure Regulator
Maintains constant 30 psi (2,1 Bar) psi outlet pressure, which minimizes misting and fogging caused by pressures above 30 psi (2,1 Bar).
Zero Flush Wiper Seal
Prevents flushing on pop-up, allowing more sprinklers on the same line.
Enhanced Retraction Spring and Wiper Seal
Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.
Small 2” (50mm) Diameter Cap
Less visible, reducing damage from exposure or vandals.
Radius
2'-17' (0.6 - 5.2 m)
Flow
0.05-3.45 GPM (0.2 - 13.1 LPM)
Recommended Operating Pressure
30-75 PSI (2.1 - 5.2 BAR)
Inlet
1/2" (12 mm) female threaded
Pop-Up Height
4", 6", 12" (100, 150, 300 mm)
Body Diameter
1 3/8" (35 mm) except 12P - 1 5/8" (41 mm) & 12P SI - 1 3/4" (45 mm)
Cap Diameter
2" (50 mm)
Body Style
Side inlet option
This model comes with the patented X-Flow shutoff device to eliminate potential erosion and safety issues.
Patented X-flow® Water Shut-off Device
Built into the riser and restricts water loss by 99% if the nozzle is removed or damaged, eliminating potential erosion or safety concerns. Allows for “dry” nozzle and filter-replacement or maintenance, while the system is running.
Zero Flush Wiper Seal
Prevents flushing on pop-up, allowing more sprinklers on the same line.
Enhanced Retraction Spring and Wiper Seal
Robust retraction spring and enhanced seal material ensures positive pop-up and retraction on all 570Z models.
One-Piece Check Valve
Easily installed at the factory or in the field. Maintains up to 10’ (3m) elevation change.
Small 2” (50mm) Diameter Cap
Less visible, reducing damage from exposure or vandals.
Radius
2'-26' (.6 - 7.9 m)
Flow
0.05-4.50 GPM (0.2 - 17 LPM)
Recommended Operating Pressure
20-75 PSI (1.4 - 5.2 Bar)
Inlet
1/2" (12 mm) female threaded
Pop-Up Height
4", 6", 12" (100 mm, 150 mm, 300 mm)
Body Diameter
1 3/8" (35 mm) except 12P - 1 5/8" (41 mm) & 12P SI - 1 3/4" (45 mm)
Cap Diameter
2" (50 mm)
Body Style
Side inlet option
Toro’s new Precision® Series Spray Nozzles are the most complete and efficient spray nozzle line available to help irrigation professionals manage water use, eliminate runoff and reduce customer water bills.
Patented H²0 Chip Technology
Using patented H²0 chip technology – and no moving parts – each Precision Series Spray nozzles creates one or more high frequency oscillating streams to achieve the desired arc and radius with 1/3 less water usage.
Maximize Irrigation Efficiency
Precision Spray nozzles deliver an industry first 1”/hr (25mm/hr) precipitation rate, which better matches soil infiltration rate. This lower precipitation rate, along with high distribution uniformity make this nozzles family the most efficient nozzle from 5’-15’ (1,5-4,6m).
Design and Retrofit Effectiveness
The lower flow rate of Precision™ Series Spray Nozzles maximizes design efficiency and saves on overall material costs by using fewer valves and less controller stations. In addition, the performance of existing systems with lower pressures can be upgraded with a simple retrofit of the pre-existing high flow nozzles.
Third-Party Performance Validation
Precision Series Spray nozzles have been tested and validated in the field and at the Center for Irrigation Technology (CIT).
Optional Pressure Compensating Device (PCD)
Maintains optimal performance even when inlet pressure rises to 40 psi and higher.
Radius
5'-15' (1.5 m - 4.6 m)
Flow
0.06-2.4 GPM (.2 - 9.6 LPM)
Precipitation Rate
≤ 1"/hr (25 mm)
Recommended Operating Pressure
Non PCD: 30 PSI (2.0 BAR) With PCD: 40 PSI (4.0 BAR) and above
Thread
Male; Female
Pattern
60, 90, 120, 150, 180, 210, 240, 270, 360 & Specialty
Making use of the same patented gear drive technology found in Toro’s world-leading Golf rotors, Precision™ Series Rotating Nozzles are powered by a planetary gear drive system that delivers a pattern of multiple wind resistant, multi-trajectory streams. The full circle and adjustable arc models deliver a radius range of 14 to 26 feet with exceptional distribution uniformity and close-in watering characteristics at a precipitation rate of 0.6 inches per hour.
Gear-Driven
Utilizes a proven planetary gear drive, variable stator and turbine to rotate the nozzle.
Fewer Models
Only two Male-threaded and two Female-threaded nozzles are required to cover radii ranging from 14-26 feet and arc requirements between 45-360 degrees.
Matched Precipitation Rate of 0.6” per hour
Water is delivered more slowly and evenly than conventional spray nozzles. The matched precipitation rate of 0.6 inches per hour is maintained after up to a 20% radius adjustment, which helps prevent excess run times often set to stay within watering windows.
Consistent Speed of Rotation
The gear drive mechanism delivers a consistent speed of rotation across an operating pressure range of 25 psi to 75 psi, minimizing the occurrence of product stalling at low pressures.
Radius
14-26 feet (4.3-7.9 m)
Flow
0.17-3.68 GPM (1.4 - 14.3 LPM)
Precipitation Rate
0.6 inches per hour (15.2 mm / hour)
Recommended Operating Pressure
20-75 PSI (1,4-5,2 Bar)
Thread
Male; Female
Pattern
45 to 270, Full-circle
Toro MPR Plus fixed spray nozzles make system design and installation easier than ever. Featuring five color-coded radii and Specialty strip models, the Toro MPR Plus nozzles operate at a matched precipitation rate, allowing design flexibility without concern for not meeting the demands of the landscape.
Matched Precipitation Rates
Ensures all nozzles apply water at approximately the same rate.
Color-coded Radius Identification
Each nozzle radius features a unique color to facilitate fast and easy nozzle identification.
Radius
5’-15’
Flow
0.05-4.58 gpm
Recommended Operating Pressure
30 psi
Thread
Male
Pattern
Quarter (90°), Third (120°), Half (180°), Two-thirds (240°), Three-quarters (270°), Full (360°), and Specialty
Quick, easy, and infinitely adjustable, Toro TVAN Variable Arc Nozzles are designed to deliver excellent irrigation efficiency with maximum versatility. Available in radii of 8, 10, 12, 15, and 17 feet, TVAN Variable Arc Nozzles are easily adjustable by hand – even under pressure – and can be mixed and matched based on the needs of the landscape due to their offering Matched Precipitation Rates.
Unique Grip And Turn Adjustment
Requires no tools and makes arc setting fast and simple. Adjust from the top of the nozzle – wet or dry.
Matched Precipitation Rates
Ensures all nozzles apply water at approximately the same rate.
Infinitely Adjustable From 0° - 360°
The TVAN provides a variety of arc settings to precisely match any terrain and reduces inventory by meeting the needs of any size or shape landscape.
Five Color-coded Nozzles
Allow for quick and easy identification even when retracted.
Radius
8, 10, 12, 15, and 17 feet
Flow
0.7-5.60 gpm
Recommended Operating Pressure
30 psi
Minimum Operating Pressure
20 psi
Thread
Male
Pattern
0 - 360
Designed for non-turf applications, Toro Stream Spray Nozzles present a solution for unique landscape settings. Featuring wind-resistant streams at 10° or 35° trajectories, Stream Spray Nozzles are available in Quarter (90°), Half (180°) or Full (360°) arc patterns and are capable of being adjusted to radii between 7 feet and 18 feet.
Flow
0.60 – 2.70 gpm
Arc
10° or 35°
Recommended Operating Pressure
30 psi
Thread
Male
Pattern
Quarter (90°), Half (180°), and Full (360°)
Toro Stream Bubbler Nozzles are designed for non-turf applications and present a solution for unique groundcover and shrub settings. Operational at pressures between 10 psi and 60 psi, Stream Bubbler Nozzles are ideal for meeting low radius requirements of three feet or less and are available in multiple patterns.
Flow
0.49 – 2.0 gpm
Recommended Operating Pressure
10-75 psi
Thread
Male
Body Style
Fits all Toro spray bodies, shrub adapters, risers and riser extenders
Pressure-Compensating Flood Bubblers.
Flow
Fixed 0.25 gpm, 0.50 gpm, and 1.0 gpm models; and Adjustable model
Recommended Operating Pressure
50 psi
Thread
Male
500 Series Bubblers
Flow
Flood: 1.7 – 2.7 gpm; Stream: 1.08 – 3.70 gpm
Recommended Operating Pressure
Flood: 15-75 psi; Stream: 10-75 psi
Inlet
.5" female thread
This unique piping acts like an extension cord, allowing you to put sprinklers exactly where you want them. Even deep-seated high-pops are easy to install in difficult, hard-to-trench locations.
Flexible, Thick-walled Polyethylene Pipe
Super Funny Pipe is a high-strength poly tubing that solves tough sprinkler installation and replacement problems. It acts as an extension cord between the water line and the sprinkler.
Easy Installation For Problem Areas
One of the most useful and time-saving sprinkler installation aids whether you are installing a new system or replacing an old sprinkler. Also comes pre-assembled as the Super Funny Pipe Swing Joints in 8” (20,3cm) and 12” (30,5cm) lengths or just get the individual fittings as needed.
Minimum Operating Pressure
120 psi (8.3 bar)
Body Diameter
ID: .49" (1.2 cm) ± 0.005 OD: .70" (1.8 cm)
Body Style
20', 50' & 100' coils (6, 15, 31 m)
Swing Joints
Body Diameter
8" x 1/2", 8" x 3/4" , 12" x 1/2" & 12" x 3/4" (20.3 x 1.3 cm, 20.3 x 1.9 cm, 30.5 x 1.3 cm & 30.5 x 1.9 cm)
